FI – IVAN 2T S2
Product Description
The IVAN 2T stone crusher is the ideal machine for farmers and contractors working mainly on road maintenance and needing to perform professional work even in tough conditions, with tractors equipped with super reducers or variable gearboxes. Its wide working surface and rotor diameter allow the IVAN to be used not only in agriculture but also for road reconstruction by crushing the old base (asphalt, concrete, or gravel) and mixing the material with components used to build a new road. Available with single or dual gear transmissions.Standard Equipment
- 3-point universal hitch (Category 3N, 3 and 4L N)
- Single-speed unit, 1000 rpm
- Reinforced rotor Ø 727 with peaks
- Rotor with Ø 35 peaks in “HIGH-STRENGTH AND WEAR-RESISTANT STEEL”
- Transmission support protection rings
- Central PTO shaft with safety bolt (tractor side yoke 1” 3/4 Z20)
- Dual side gear transmission in oil bath “by Valentini-4G”
- Bearing supports with special seals “Labyrinth Bearing Protection by Valentini”
- Rear containment sheets and selection grids for crushed product, adjustable with HYDRAULIC jack
- Front conveyors adjustable with HYDRAULIC jack
- HYDRAULIC adjustment of skids for working depth
- Protective shroud and outer side skid
- Protective counter bonnet in “HIGH-STRENGTH AND WEAR-RESISTANT STEEL”
- Friction timing system “By Valentini”
- CE safety protections
- Front protective flaps
- Anti-intrusion protections for transport
- Parking stands
- Variable transmission
- Hydraulic distributors required: from 2 to 6
- If necessary, equip the tractor with front ballast
| MODEL | POWER HP | POWER kW | WORKING WIDTH mm | TOTAL WIDTH mm | NO. OF PEAKS** | WORKING DEPTH ON ROCK BASE* cm | WORKING DEPTH ON SOFT GROUND* cm | ROTOR rpm | WEIGHT* kg |
| 1800 | 180/280 | 132/205 | 1865 | 2285 | 143 | 19 | 35 | 265 | 4150 |
| 2000 | 200/280 | 147/205 | 2065 | 2485 | 158 | 19 | 35 | 265 | 4450 |
| 2300 | 220/380 | 161/279 | 2365 | 2785 | 185 | 19 | 35 | 265 | 4900 |
| 2500 | 230/380 | 169/279 | 2565 | 2985 | 192 | 19 | 35 | 265 | 5200 |
| 2800 | 250/380 | 183/279 | 2865 | 3285 | 230 | 19 | 35 | 265 | 5500 |
*Approximate **Excluding additional teeth for rotor balancing
TECHNICAL SHEET